Dental Intra Oral Welder for Implants
SKU:
Intaroralwelding
Italian made CE marked medical device used to join and stabilize immediate loading implants with a rigid splint in order to break down the masticatory forces applied on implants during healing and osseointegration.
By means of a welding clamp endowed with copper electrodes, a pre-fabricated titanium bar is welded to the implant abutments directly in the oral cavity: an intense electric discharge passes through contact point between the two titanium elements for a very short time (few milliseconds) without heating the surrounding tissues.
The current flowing between the titanium elements warms up the point of fusion, achieving a solid welded junction. Such rigid fixation reduces the mechanical stress exerted on each implant during mastication and prevents the risk of micromovements, thus favouring the stability of the implants during the early stages of bone integration.
There is no risk for the patient since during the welding process the pliers are automatically disconnected from the mains and the heat produced is dissipated through the copper electrodes thanks to the greater thermal conductivity of copper compared to titanium.
Accessories included
Control Pedal
Welding Clamp Electrodes
Cable Anti Shock System
Dental Intra Oral Welder for Implants
Italian made CE marked medical device used to join and stabilize immediate loading implants with a rigid splint in order to break down the masticatory forces applied on implants during healing and osseointegration.
By means of a welding clamp endowed with copper electrodes, a pre-fabricated titanium bar is welded to the implant abutments directly in the oral cavity: an intense electric discharge passes through contact point between the two titanium elements for a very short time (few milliseconds) without heating the surrounding tissues.
The current flowing between the titanium elements warms up the point of fusion, achieving a solid welded junction. Such rigid fixation reduces the mechanical stress exerted on each implant during mastication and prevents the risk of micromovements, thus favouring the stability of the implants during the early stages of bone integration.
There is no risk for the patient since during the welding process the pliers are automatically disconnected from the mains and the heat produced is dissipated through the copper electrodes thanks to the greater thermal conductivity of copper compared to titanium.
Accessories included
Control Pedal
Welding Clamp Electrodes
Cable Anti Shock System
Model: INTRAORALWELDING
Power supply: 230VAC
Network frequency: 50Hz, 60Hz
Input average power: 10W Maximux peak power (during welding phase): 2 1KW
Medical Device Class: 2B
Insulation Class:I – Handpiece
Type BFProtection against anesthetic:
Equipment not suitable for use in the presence of a flammable anesthetic mixture with oxygen or nitrous oxide.
IP degree of protection: IPX0 Mode of use: Continuous operation.
Working conditions: Temp./RH/Press. 10°C – 35°C 30% – 90% 700-1100 hPa
Storage conditions: Temp./RH/Press. 5°C – 50°C 30% – 90% 700-1100 hPa
External connections:PedalWeight:About 7 KgSize:30x22x17cm (length x width x height)
MAIN PARAMETERSPower:30J-300JEmission mode:Selectable: Single – Double pulseTime between two pulses:5sMode of use:ContinuousWelding power stability:± 20%
Intaroralwelding
2 Items
We deliver worldwide.
1. The best way to find out the total cost of the goods and shipping; is to add the products you wish to order, to the cart.
2. Then click on Checkout button.
3. On the checkout page feed in your shipping address.
4. Total cost of Goods and Shipping will appear on the right pane. (please be patient it may take a few moments for it to give the shipping options and cost)
4 other products in the same category:
Dental Intra Oral Welder for Implants
Italian made CE marked medical device used to join and stabilize immediate loading implants with a rigid splint in order to break down the masticatory forces applied on implants during healing and osseointegration.
By means of a welding clamp endowed with copper electrodes, a pre-fabricated titanium bar is welded to the implant abutments directly in the oral cavity: an intense electric discharge passes through contact point between the two titanium elements for a very short time (few milliseconds) without heating the surrounding tissues.
The current flowing between the titanium elements warms up the point of fusion, achieving a solid welded junction. Such rigid fixation reduces the mechanical stress exerted on each implant during mastication and prevents the risk of micromovements, thus favouring the stability of the implants during the early stages of bone integration.
There is no risk for the patient since during the welding process the pliers are automatically disconnected from the mains and the heat produced is dissipated through the copper electrodes thanks to the greater thermal conductivity of copper compared to titanium.
Accessories included
Control Pedal
Welding Clamp Electrodes
Cable Anti Shock System