Dental Fast and Slow Hand piece

Dental Drill Hand piece

A dental drill or handpiece is a hand-held, a mechanical instrument used to perform a variety of common dental procedures, including removing decay, polishing fillings, performing cosmetic dentistry, and altering prostheses. The handpiece itself consists of internal mechanical components that initiate a rotational force and provide power to the cutting instrument, usually a dental bur. The type of apparatus used clinically will vary depending on the required function dictated by the dental procedure. It is common for a light source and cooling water-spray system to also be incorporated into certain handpieces; this improves visibility, accuracy and overall success of the procedure. 

Full Handpiece Kit with 1 Push Button Type Fast Handpiece + 1 Slow Hand Piece Motor + 1 Contra Angle Slow Hand Piece + 1 Straight Hand Piece - 4 hole hand piece.

Price for 2 or 4 Hole Handpiece is the same. At the time of ordering please mention your preference.

Handpieces are autoclavable up to 135℃, sterilized at 121℃ for 20 minutes or at 132℃. for 15 minutes.

High Speed Turbine :

Steel bearing, Torque head, Midwest 4 hole/Borden 2 hole, Bur shankφ: 1.59-1.60mm, Air pressure: 2.5-2.8bars, Torque ≥0.11N.cm Noise ≤65db, Rotate speeding: 320,000-350,000 min-1

Features:

• Steel bearing: long life service, quiet, less vibration, great precision.
• Push button bur locking type with anti-heating safety system it can reduce the risk of burning your patients with the head of your instruments.
• Single-spray: cooling supplied by four separate ducts, the ultra-precise nebulization cools the bur and the dental material as efficiently as possible.
• The separate water and air ducts also prevent blockage.
• Handle: light, slim, ultra-resistant, it can withstand hundreds of sterilization leaving no signs of deterioration.
• With a water anti-retraction valve to enhance infection control.

Contra Angle Hand piece :

Latch type Contra Angle, Oil retaining bearing, Bur shank:φ2.35mm, Ratio: direct ratio 1:1, Removable external irrigation, Max speed: 30,000min-1

Features:

• Contra angle latch type with anti-heating safety system, this can reduce the risk of burning your patients by your instruments.
• Axes and gears are machined in stainless steel with high resistance to corrosion.
• Ideal Geometry: improved the accessibility to areas at the rear of the mouth, the type angles are designed to offer you improved handling and accessibility.

Air-Motor :

Ratio: direct ratio 1:1

Borden 2 hole

Bur shank: φ2.35mm

Pressure: 245-313Kpa

Rotation speed: 18,000-25,000min-1

Removable external irrigation

Features:

◆ O-rings: resistant to repeated sterilization.

◆ Ultra-precise control of the torque and rotation and it is quiet and

vibration free.

Freedom of movement for optimum working comfort,

◆ This instrument with high -technology electrical contacts, it results in

excellent electrical conductivity and improved resistance to oxidation.

Straight Hand Piece :

Ratio: direct ratio 1:1

E-type connector

Bur shank: φ2.35mm

Pressure: 245-313Kpa

Rotation speed: 18,000-25,000 min-1

Removable external irrigation

Features:

◆ Single check valve install inside that prevent drag up,

◆ This type straight has been designed to withstand the considerable stress

resulting from the repeated lateral pressure, while maintaining exceptional

precision. A tooth can be cut rapidly and the temperature generated on

remains low, fast speed, comfort, and precision is assured.